For an aircraft to be fully compatible with RealSimGear hardware, there are three criteria that must be met:

  1. The avionics screens must support pop-out or undocking to allow them to be repositioned to the corresponding RealSimGear hardware screens.

  2. The avionics screens must support removing the bezel graphics to allow only the applicable info to be displayed on the RealSimGear void of surrounding bezels.

  3. The aircraft must make use of standard Laminar commands/dataref's (X-Plane) or SimConnect events/offsets (FSX and P3D).

The following configurations and aircraft have been tested with the RealSimGear hardware, and have been found to be compatible as noted.

X-Plane 11

  • TorqueSim Cirrus SR22 Series - This custom aircraft was designed specifically to work with RealSimGear hardware. As such, it is 100% compatible.

  • Generally, any aircraft that uses the Laminar GNS430/530 or G1000 avionics is fully supported by the RealSimGear GNS430/530, G1000, GFC700 autopilot, and GMA350 audio panels.  Additionally, the use of the Reality-XP GNS430/530 or GTN650/750 software, is fully compatible with the corresponding RealSimGear hardware, regardless of the aircraft being flown.

  • Hotstart TBM900 - This aircraft uses a customized version of the Laminar G1000 software.  As such, it is fully compatible with the RealSimGear G1000 PFD/MFD, GFC500/700, GMA350, and GCU47x.  The TBM900 does make use of custom datarefs and commands, RealSimGear provides a custom CommandMapping file to support.  More info HERE.

  • Aerobask DA62 - This aircraft uses a customized version of the Laminar G1000 software.  As such, it is fully compatible with the RealSimGear G1000 PFD/MFD, GFC500/700, GMA350, and GCU47x.

  • Aerobask Epic E1000/G1000 - This aircraft uses a customized version of the Laminar G1000 software.  As such, it is fully compatible with the RealSimGear G1000 PFD/MFD, GFC500/700, GMA350, and GCU47x.

  • Aerobask Phenom 300 - This aircraft uses a customized version of the Laminar G1000 software. As such, it is fully compatible with the RealSimGear G1000 PFD/MFD, GFC500/700, GMA350, and GCU47x.

  • vFlyteAir Cirrus SR20 - Currently this aircraft is partially supported, although the author is working to incorporate the Laminar G1000 which will make it fully compatible.  More info HERE.

  • Carenado Cessna 172 and 182T (with Laminar G1000), 208 Caravan (G1000), Piper Malibu Meridian - These aircraft use a customized version of the Laminar G1000 software.  As such, it is fully compatible with the RealSimGear G1000 PFD/MFD, GFC500/700, GMA350, and GCU47x.  However, the native bezel removal and resizing do not work properly. To address this issue, we have developed custom pop-out plugins for these aircraft, which you can read about and download HERE.

  • STMA Diamond DA-40 - This aircraft uses the standard Laminar G1000 suite, therefore completely compatible with all RealSimGear products.

  • AFM Mooney Oviation III and Acclaim - The latest version, v4, contains the ability to pop out the PFD and MFD and uses the standard Laminar G1000 as its base, therefore it is completely compatible with all RealSimGear products. You will need to bind a key for the PFD and MFD to pop the G1000's out. Under settings go to the keyboard and find the "AFM" category than the "cmd". You will then see where you can assign a key to pop each of these out.

  • RWDesign Cessna Citation Mustang - This is fully compatible with the RealSimGear G1000 PFD/MFD, GFC500/700, GMA350, and GCU47x when using the custom RealSimGear pop-out plugin which can be downloaded from HERE.

  • Thranda Quest Kodiak - This is fully compatible with the RealSimGear G1000 PFD/MFD, GFC500/700, GMA350, and GCU47x when using the custom RealSimGear pop-out plugin which can be downloaded from HERE.

  • JustFlight Archer III TX - This is fully compatible with the RealSimGear G1000 PFD/MFD, GFC500/700, GMA350, and GCU47x when using the custom RealSimGear pop-out plugin which can be downloaded from HERE.

User Reported as Compatible (X-Plane 11)

  • vSkyLabs FA Tensor 600 - User reported this aircraft is compatible with the RealSimGear G1000 hardware.

  • vSkyLabs Tecnam P2006T - User reported this aircraft is compatible with the RealSimGear G1000 hardware

P3D v4

  • Generally, when using the Reality-XP GNS430/530, GTN650/750 software packages, are fully compatible with the corresponding RealSimGear hardware, regardless of the aircraft being flown. At this time, there are no known G1000 aircraft compatible with the RealSimGear hardware.

Unsupported Aircraft

  • Carenado Phenom 100, X-Plane - This aircraft does not support pop-out windows and uses a custom Carenado G1000 which does not support external commands

  • Aerobask Eclipse 550, X-Plane - This aircraft has custom-coded GTN750 and GTN650 avionics which is not compatible with our GTN750 and GTN650 bezels as the screens cannot be popped out.   

  • Aerobask Pipistrel Panthera, X-Plane - This aircraft has custom-coded GTN750 and GTN650 avionics which is not compatible with our GTN750 and GTN650 bezels as the screens cannot be popped out.

  • Alabeo DA-62. This aircraft has implemented a custom-coded G1000 and does not work with our G1000 hardware.

Did this answer your question?