Downloads For X-Plane 11 and X-Plane 12

RealSimGear X-Plane Plugin - Windows

Note: If you have recently updated your installation of X-Plane 12, please re-run the RealSimGear plugin installer for X-Plane 12. The X-Plane update process may overwrite files updated by the plugin installer.

RealSimGear X-Plane Plugin - MacOS

• X-Plane 11 and 12 - macOS - v2.3.1 - ZIP gets opened, and the "RealSimGear_XP-Plugin_Installer.app" is run. Install the guide HERE. 

   

Individual Command Mapping Files:

Default Command Mapping for TDS Simulations GTNXi Avionics

Default Command Mapping for RealityXP Avionics (GNS/GTN)

Additional Command Mapping files

• G500 software on G1000 hardware CommandMapping.ini - Version 1.2 - This is used if you are using the G500 software on G1000 hardware. This file would go in the base folder of the appropriate aircraft.
  ​

• TorqueSim SR20/22 - Version 5.5 - This is used with the TorqueSim G3/G6 SR20/22 aircraft. This file goes in the "..\X-Plane 11\Aircraft\X-Aviation\SR22 Collection\SR22 (or SR22T)" folders.
  ​

• TorqueSim SR20/22 - Avidyne (Stec 55) Version - Version 1.8 - This is used with the new TorqueSim SR22 Avidyne Version.
  ​

• TorqueSim SR20/22 - Avidyne (DFC90) Version - Version 2.0 - This is used with the new TorqueSim SR22 Avidyne Version and supports the new RealSimGear DFC90 autopilot.
  ​

• Hotstart TBM900 - Version 5.2 - This is used for the RealSimGear Plugin version 1.5 or newer - This file goes in the "..\X-Plane 11\Aircraft\X-Aviation\TBM900" folder.
  ​

• RW Designs Citation Mustang - Version 1.9 - This file goes in the base of the Mustang folder.
  ​

• AirFoilLabs Cessna 172NG - Version 1.1 - This file would go in the base folder of the AirFoilLabs 172NG.
  ​

• AFM Mooney M20 - ** Only for plugin version 2.0.1 or newer. This file goes in the base folder of any of the M20 Mooney Aircraft.
  ​

• Alabeo Saratoga II - Version 1.0 - This file would go in the Alabeo Saratoga II base folder.
  ​

• Aerobask DA50 - Version 1.0 - This is a modified CommandMapping file that maps the Generic Switch Panel to somewhat control DA50 switches.
  ​

• G1000 controlling the Gauges Plugin - Version 1.1 - Remaps G1000 PFD/MFD buttons/knobs to control some features of the Gauges Plugin This command mapping file needs to be placed in the root folder of the aircraft you have installed the RealSimGear Analog Gauges. For example if you install the gauges in the X-Plane 12 Cessna 172, the command mapping file is placed in C:\X-Plane 12\Aircraft\Laminar Research\Cessna 1762 SP.
  ​

Additional Software

Driver for USB3 Display Adapter

• Driver for USB3 Display Adapter (Windows Only)

PenMount Touchscreen Driver

• Driver for the PenMount Touchscreen (Windows Only)